TRACK Learning path · 6 labs

Site Engineering Track

Installation, testing and paperwork: the side of MEP engineering you learn on site, not in the design office. Six interactive labs in three phases take you from your first permit to handover. Work through them in order, or jump to the one you need today.

Phase 1

Site readiness & safety

🦺SITE-501 · Step 1 of 6Permit to Work & Site Safety LabPermit selector for 15 site activities, 5x5 risk assessment, LOTO and prove-dead simulator, hot work permit check and a 3D/4D SIMOPS site day.Open lab →📐SITE-502 · Step 2 of 6FC & Shop Drawings LabFC vs shop drawings, title block and ISO 19650 number decoder, spot-the-difference review, superseded prints and a 3D FC/shop/as-built void.Open lab →
Phase 2

The paper trail

📋SITE-503 · Step 3 of 6Material Submittal & Inspection Request TrackerLive material submittal and IR logs with review periods, approval gate, site decision game, S-curve dashboard and 3D inspection status.Open lab →📌SITE-504 · Step 4 of 6Snag & Punch List ManagerPin snags on a plan, A/B/C categories, fixed and verified workflow, spot-the-snag game, 3D pins and a burndown to the handover date.Open lab →
Phase 3

Testing, commissioning & handover

🧾SITE-505 · Step 5 of 6Method Statement & ITP Review LabReview three method statements with planted errors, build an ITP with hold and witness points and simulate their programme impact.Open lab →🧪SITE-506 · Step 6 of 6FAT, SAT & Site Testing LabMegger IR with PI and DAR, R1+R2 and Zs, RCD trip times, hydrostatic pressure test with gauge and 3D rig, and FAT/SAT witness checklists.Open lab →

Next: Design Engineering Track

Calculations, sizing and drawing compliance: codes and authority rules, symbols, SLDs and P&IDs, cooling loads and duct static pressure, cable sizing and lighting, fixture units and drainage, coordination and calculation sheets.

Open the Design Engineering Track →
BUILT FROM YOUR FEEDBACK

Thank you to the engineers who asked for this

A visitor wrote in asking for a learning path on the site side of the job: installation, testing and the paperwork that goes with it. This track is the answer to that message. Thank you for taking the time to write. Your comments shape what gets built next.

Finish all six labs and print your certificate →   Suggest the next lab →

Standards and regions covered

Built around DEWA and ADDC (TAQA Distribution) inspection and energisation, DCD inspections and approvals, BS 7671 Part 6, AS/NZS 3000 Section 8 and AS/NZS 3017. Engineers use it on projects in Dubai, Abu Dhabi, Sharjah and the Northern Emirates, and in Auckland, the rest of New Zealand and Australia. Always confirm the edition your authority or client has adopted before relying on a result.